Triumph models with the Keihin Gen3 ECU

  • Daytona 675 (2013 onward)
  • Street Triple 675 (2013 onward)
  • Bonneville T120 (2016 onward)
  • Thruxton and Thruxton R(2016 onward)

    •  

    Features

     

    Purchase

     

    Downloads

     

    Live mapping

    The live mapping allows fuel and ignition changes to be made while the motor is running, this speeds up the tuning process and makes it much easier to find the best air fuel mix and ignition advance.
    The live tuning is done with the TuneBoyTrim program, once you have tuned the motorcycle you save the trim file to the ECU without needing to reflash the ECU.
    If you also have the Innovate LC-1 or LC-2 wide band O2 controller you can connect this to the O2 sensor plug or directly to the PC with a USB-Serial adapter.
    With the wide band O2 controller the TuneBoyTrim program can automate most of the tuning process, this reduces the time required to tune the motorcycle, in most cases the entire tune process will take less than 1 hour

     

    Map Switching

    The TuneBoy trim files can be saved in the TuneBoy WiFi device, this allows you to select the any of the saved trim files to update the trim file in the ECU, this is done via a web interface on your mobile phone.

    Map Editing

    The TuneEdit program allows you to adjust fuel, ignition and other tables for the Triumph map files.
    Maps that you can adjust are the fuel tables, Ignition tables,A/F target tables, Idle tables etc. You can also adjust the rev limit, correct the speedo and you can change other settings like thermo fan settings and some of the TuneBoy specific features.
    The following screen shot shows the TuneEdit program with a Daytona 675 map file open.
     

     
    The fuel and ignition maps can be viewed as text as shown in the screen shot above or they can be viewed in a graphical view
    The screen shot below shows the fuel map in the graphical view.
     

     

    Cruise Control

    The TuneBoy map adds cruise control using the start button on selected models (Bonnieville and Thruxton), this means you can add cruise control without needing to purchase the expensive left switch block.
    The cruise speed can be adjusted using a mobile phone (via the web interface on the TuneBoy device).
    The start button only activates the starter if the motor is stopped, once the motor is started the start button becomes the cruise control button.

     

    Starter kits

    • Tune Kit: Triumph  TuneEdit WiFi Kit

      Part Number:  KITTR_WIFI
      Description:  This kit provides the user with a TuneBoy WiFi device for reflashing and tuning. With this you can create your own custom map to suit most bike set-ups. This kit comes with the WiFi device to connect the Motorcycle to the PC and the software required to do live tuning of the Triumph models with the Keihin Gen 3 ECU.

    • Price:  $399
    • Also Available:  Dyno Tuning Service

     

    Additional Accessories

    • TuneEdit Key for an extra ECU/Bike  |  KEYM  |  $199