Loading your first tune with TuneEdit

Initial TuneBoy Setup

1.    This tutorial assumes that you have completed the Getting Started tutorial and have the TuneBoy and TuneEdit programs installed and communicating with the bike.

Download the tune that you want to load, place it in the TuneBoy directory. By default this is

c:\program files\aura computer software\tuneboy

Now start TuneEdit and click on the File menu and select Open Tune File as shown below.

This will then popup the Open Tune box. If you single click on a tune file you will see the notes from that tune at the bottom of the popup box. Once you find the tune you want just click the Open button.

This will have loaded the tune into TuneEdit and the Download button should be yellow (this indicates that TuneEdit is ready to do a download).

Now make sure that the bike is connected with the TuneBoy cable and that the ignition is on, then click the Download button to start the download.

Once the download is started you should see a download in progress message at the bottom of the screen, the progress bar will also start to fill in as shown in this next screen shot.

When the progress bar reaches the end you will hear the fuel pump on the bike prime and the download complete message box will be displayed.

That is all there is to it. To revert back to your standard tune just repeat the process using the standard tune file, these can be found on this page and on the T595.net web site.